To begin, log into your router. Once logged in, click on the "PPP" tab on the left-side menu. You should have the "Interface" tab open. Now click on the sign and select "L2TP Client" (Make sure you enter the correct details in the appropriate…
https://www.youtube.com/watch?v=oeSgOurbkr8&t=429s
https://support.hidemyass.com/hc/en-us/articles/204558497-Mikrotik-Client-Setup
How to Setup a Multi-Protocol VPN Server Using SoftEther Introduction This article explains how to install and configure a multi-protocol VPN server using the SoftEther package. We enable and configure OpenVPN and L2TP over IPSec and SSTP VPN Servers on…
USE the SCP protocol Test connecting with WINSCP using using the SCP protocol and the bitnami (low priviledge user) and your private key. On the Advanced tab of WINSCP specify the Shell to be sudo su- Use the SFTP protocol…
Open an Administrator Command Prompt and type: netsh int ip reset c:\resetLog.txt If all goes well, then the operation should be successful. But if any messages saying "Access denied" come up, then you'll have to resort to delving around in…
Netmask Netmask (binary) CIDR Notes _____________________________________________________________________________ 255.255.255.255 11111111.11111111.11111111.11111111 /32 Host (single addr) 255.255.255.254 11111111.11111111.11111111.11111110 /31 Unuseable 255.255.255.252 11111111.11111111.11111111.11111100 /30 2 useable 255.255.255.248 11111111.11111111.11111111.11111000 /29 6 useable 255.255.255.240 11111111.11111111.11111111.11110000 /28 14 useable 255.255.255.224 11111111.11111111.11111111.11100000 /27 30 useable 255.255.255.192 11111111.11111111.11111111.11000000 /26 62…
How to find the proper MTU size for my network - Welcome to TP-LINK How to find the proper MTU size for my network Helpful hint: One way to verify whether if it is an MTU problem is to try…
Open the command prompt and run telnet. Connect to <Router_LAN_IP> e.g. 192.168.1.1 so in the command prompt, this would look like: telnet 192.168.1.1 When asked for the username, enter root (even if you changed username in web interface) When asked for…